ADTRAN Octal BRI S/T, User Manual

Page: 37 / 40

Appendix A. Dial Plan Interface Configuration
61200343L1-1 Octal BRI S/T User Manual 37
S
WITCH
T
YPE
Write security: 2; Read security: 5
Defines the type of ISDN switch that the port will simulate. If connected to
another ATLAS, both need to be set to the same type. The following options
are available:
• Lucent 5E
• Northern DMS 100
• National-ISDN
• Euro-ISDN
SPID L
IST
Write security: 2; Read security: 5
The port, acting as the network, must use a SPID and a phone number in
order to satisfy the ISDN connection protocol expected by the user’s Termi-
nal Adapter (TA).
P
HONE
N
UMBER The phone number(s) assigned to this BRI phone line.
SPID N
UMBER Defines the SPID number(s) used for this BRI line. Although the value of the
SPID is not significant, a SPID must be entered for each phone number. For
convenience, the SPID can be set to be the same as the phone number.
Octal BRI S/T Module Module does not support autoSPID detection
software which some terminal adapters offer.
C
ALLS For User terminations, the number of calls is fixed at 2.
D64, D56, A
UDIO
,
S
PEECH
These options reflect what the network has provisioned for this SPID. If the
BRI was purchased with different services provisioned for the SPIDs, then
the call must match the services supported.
No SPID Number is needed for the Euro-ISDN Switch Type.