ADTRAN NxT1 HSSI/V-35, User Manual

Page: 32 / 48

Chapter 3. Operation
32 NxT1 HSSI/V.35 Module User Manual 61200771L1-1
N
X
T1 HSSI
O
PTION
M
ODULE
The NxT1 HSSI/V.35 Module system controller automatically detects the
presence of the NxT1 HSSI Option Module when it is installed in the system
(listed as
N
X
T1 HSSI ). To see the menus for the NxT1 HSSI Option Module
via the terminal menu, use the arrow keys to scroll to the M
ODULES
menu
and press <Enter> to access the module choices. V.35 is available when us-
ing the optional adapter cable (ADTRAN P/N 3125I081). Some of the fol-
lowing menus do not apply when configured for V.35 mode.
I
NFO
Read security: 5
Provides information about the module part number, serial number and as-
sembly revision.
P
ART
N
UMBER
Read security: 5
Displays the part number of the module.
S
ERIAL
N
UMBER
Read security: 5
Displays the serial number of the module.
A
SSEMBLY
R
EVISION
Read security: 5
Displays the assembly revision.
F
IRMWARE
R
EVISION
Read security: 5
Displays the current firmware revision of the NxT1 HSSI Option Module.
T1 E
NABLE
Write Security: 3; Read Security: 5
Configures the NxT1 HSSI Option Module to activate the module’s four
built-inT1 interfaces. When configuring the module to use more than four
T1s from other installed T1/T3 modules, this field should be set to
D
ISABLED
.
The NxT1 HSSI/V.35 Module’s four built-in T1 interfaces are activated collectively as a bundle.
Setting the
T1 E
NABLE
menu to
E
NABLED
allows you to map from any/all of the built-in T1
ports to the HSSI interface. Setting the
T1 E
NABLE
menu to
D
ISABLED
requires ALL of the T1s
mapped to the HSSI interface to be from other installed T1/T3 modules.