background image

NetVanta 3200/3300/3400 Series

 Option Modules

61200860L1-34AB

Copyright © 2012 ADTRAN, Inc.

45

Network Interface Modules

NetVanta 56K/64K NIM (P/N 1200861L1)

The NetVanta 56K/64K NIM (shown in 

Figure 16

) provides a DDS WAN interface for the NetVanta 3000 

Series. This module provides a single 56K or 64K DDS network interface. See 

Table A-6 on page 87

 for 

the WAN-DDS connector pinouts, and see 

Table A-15 on page 91

 for the DBU connector pinouts. An 

optional DIM is required for dial backup applications.

Figure 16.  NetVanta 56K/64K NIM

Features and Specifications

Operating Modes

Dedicated DDS (leased line)

DDS Interface

Supported Standards: AT&T TR 62310

4-wire, full-duplex

Receiver Sensitivity: -45 dB, all rates

Data Rates: 56K, 64K, and auto

Connector: RJ-48C

Clock Source

Network

Internal

Diagnostics

CSU and DSU Loopbacks

Compliance

EMC - see 

Electromagnetic Compatibility 

(EMC) Table on page 6

.

ACTA/FCC Part 68

IC CS-03

UL/CUL 60950-1

Environmental

Operating Temperature: 0°C to 50°C

Storage Temperature: -20°C to 70°C

Relative Humidity: Up to 95 percent, 
noncondensing

Physical

Dimensions: 2.75-inch W x 4.25-inch D

Summary of Contents for NetVanta 3200 series



























































































Reviews: