617108108PF2-13D
3
2. Attach the four adhesive rubber feet to the bottom of the switch.
Figure 5. Attaching the Rubber Feet
f
CAUTION!
Desk, shelf, or wall mounting of the equipment should be such that the amount of air flow required for safe operation of the equipment is not compro
-
mised. Allow 1-inch clearance on the top and sides of the unit for sufficient air flow.
Mounting on a Wall
To mount the switch on a wall, complete the following steps.
1. Using the mounting holes on the bottom of the unit as a template, install the user-supplied screws in the appropriate location on the wall. Be aware
of the dimensional limitations of the screws.
Figure 6. Install Screws in the Wall
2. Hang the switch on the screws and ensure that it is securely attached.
Figure 7. Attaching the Switch to the Wall
f
CAUTION!
The NetVanta 1560-08-150W must be mounted in the face down orientation when wall mounted.
