ADTRAN HDSL 3192 HTU-C Installation And Maintenance Practice Download Page 24 | Manualshive

Page: 24 / 52

background image

HDSL 3192 HTU-C Installation and Maintenance Practice

16

61247004L1-5A

MENU DESCRIPTIONS

The following subsections describe the 3192 HTU-C menu screens. A terminal session is
initiated by entering multiple space bar characters, which determines the speed of the
terminal. Once the speed has been determined, an Introductory menu appears. This screen is
illustrated in

NOTE

The screens illustrated in

apply to an HDSL

circuit deployed with ADTRAN’s HDSL technology, using an 3192
HTU-C, an HTU-R, and two HREs. This sample configuration was
chosen in order to illustrate as much functionality as possible;
however, other configurations are possible and their displays will
vary slightly from those shown in this section.

Figure 6. Introductory Menu Screen

Circuit ID:HNTSVLALHDSL MM/DD/YY hh:mm:ss

ADTRAN

901 Explorer Boulevard

Huntsville, Alabama 35806-2807

--------------- For Information or Technical Support----------------

Support Hours ( Normal 7am - 7pm CST, Emergency 7 days x 24 hours )

Phone: 800.726.8663 / 888.873.HDSL Fax: 256.963.6217 Internet: www.adtran.com

-------------------------------------------------------------------------------

HTU-C INFORMATION                       HTU-R INFORMATION
-----------------                       -----------------
S/N : A601A4121                         S/N : A106B5672
CLEI: T1I3AAPAAA                        CLEI: T1I3AAVAAB
MANF: 01/08                            MANF: 01/08

HRE #1 INFORMATION                     HRE #2 INFORMATION
------------------                     -------------------
S/N : B905A5505                         S/N : A917C2045
CLEI: T1RPAACBAA                        CLEI: T1RPAACBAA
MANF: 01/08                            MANF: 01/08

Press “M” to view Main Menu.

«
...
22
23
24
25
26
...
»

Summary of Contents for HDSL 3192 HTU-C





















































Reviews:

No comments

Related manuals for HDSL 3192 HTU-C

Brand: Wave wifi Pages: 2

Device Server UDS 10

Brand: Lantronix Pages: 8

Brand: VMIC Pages: 126

Brand: Conceptronic Pages: 230

Brand: SMART Pages: 15

IBOX-BAC Series

Brand: IntesisBox Pages: 2

WRT54GR - Wireless-G Broadband Router

Brand: Linksys Pages: 81

Brand: Endace Pages: 51

TD-3316B4-16P-A1

Brand: TVT Digital Pages: 2

BROADCAST POLLING FRAD BPF-14 BU

Brand: DCB Pages: 28

OptiBond 210 C Series

Brand: i-MO Pages: 16

Brand: Supermicro Pages: 15

Brand: Kaya Instruments Pages: 48

Brand: Intel Pages: 20

Brand: Cypress Semiconductor Pages: 28

AGENT-2 S41D Line

Brand: Pullnet Pages: 89

ULTRIX-FM-NS-1RU

Brand: Ross Pages: 5

7798 I/SITE LAN

Brand: CSI Pages: 56

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands