ADTRAN Express 6530, Installation And Maintenance Manual

Page: 11 / 20

61225001L1-5D 11
Typical Applications
Framed Full E1 Service is set up using the quick key
“G,” and then selecting “A” to save the changes. The
screen in
Figure 8 illustrates a cross-connect map
configured for Framed Full E1 Service.
Unframed Full E1 Service is set up using the quick
key “G,” entering “1” in both the SHDSL TS0 slot
and the G.703 TS0 slot, and then selecting “A” to save
the changes. The screen in
Figure 9
illustrates a
cross-connect map configured for Unframed Full E1
Service.
Figure 9. Unframed Full E1 Service
Figure 8. Framed Full E1 Service
Circuit ID: 01-Jan-00 23:36:38
Unit Mode: NT Provisioning Type: Local
Cross-Connect Map
SHDSL Timeslots G.703 Timeslots
TS0 = 32 TS12 = 1 TS24 = 1 TS0 = 32 TS12 = 1 TS24 = 1
TS1 = 1 TS13 = 1 TS25 = 1 TS1 = 1 TS13 = 1 TS25 = 1
TS2 = 1 TS14 = 1 TS26 = 1 TS2 = 1 TS14 = 1 TS26 = 1
TS3 = 1 TS15 = 1 TS27 = 1 TS3 = 1 TS15 = 1 TS27 = 1
TS4 = 1 TS16 = 1 TS28 = 1 TS4 = 1 TS16 = 1 TS28 = 1
TS5 = 1 TS17 = 1 TS29 = 1 TS5 = 1 TS17 = 1 TS29 = 1
TS6 = 1 TS18 = 1 TS30 = 1 TS6 = 1 TS18 = 1 TS30 = 1
TS7 = 1 TS19 = 1 TS31 = 1 TS7 = 1 TS19 = 1 TS31 = 1
TS8 = 1 TS20 = 1 TS32 = N/A TS8 = 1 TS20 = 1
TS9 = 1 TS21 = 1 TS33 = N/A TS9 = 1 TS21 = 1
TS10 = 1 TS22 = 1 TS34 = N/A TS10 = 1 TS22 = 1
TS11 = 1 TS23 = 1 TS35 = N/A TS11 = 1 TS23 = 1
Timeslot Assignments Commands
0. Idle A. Apply New Map G. Full G.703 Service
1.-31. G.703 Service 1-31 U. Undo New Map N. Full Nx64K Service
32. G.704 Frame Tab. Select SHDSL or G.703 Timeslots
33. Nx64K Service Arrow Keys. Move Cursor
G.704 Framing = N/A
Circuit ID: 01-Jan-00 23:40:07
Unit Mode: NT Provisioning Type: Local
Cross-Connect Map
SHDSL Timeslots G.703 Timeslots
TS0 = 1 TS12 = 1 TS24 = 1 TS0 = 1 TS12 = 1 TS24 = 1
TS1 = 1 TS13 = 1 TS25 = 1 TS1 = 1 TS13 = 1 TS25 = 1
TS2 = 1 TS14 = 1 TS26 = 1 TS2 = 1 TS14 = 1 TS26 = 1
TS3 = 1 TS15 = 1 TS27 = 1 TS3 = 1 TS15 = 1 TS27 = 1
TS4 = 1 TS16 = 1 TS28 = 1 TS4 = 1 TS16 = 1 TS28 = 1
TS5 = 1 TS17 = 1 TS29 = 1 TS5 = 1 TS17 = 1 TS29 = 1
TS6 = 1 TS18 = 1 TS30 = 1 TS6 = 1 TS18 = 1 TS30 = 1
TS7 = 1 TS19 = 1 TS31 = 1 TS7 = 1 TS19 = 1 TS31 = 1
TS8 = 1 TS20 = 1 TS32 = N/A TS8 = 1 TS20 = 1
TS9 = 1 TS21 = 1 TS33 = N/A TS9 = 1 TS21 = 1
TS10 = 1 TS22 = 1 TS34 = N/A TS10 = 1 TS22 = 1
TS11 = 1 TS23 = 1 TS35 = N/A TS11 = 1 TS23 = 1
Timeslot Assignments Commands
0. Idle A. Apply New Map G. Full G.703 Service
1.-31. G.703 Service 1-31 U. Undo New Map N. Full Nx64K Service
32. G.704 Frame Tab. Select SHDSL or G.703 Timeslots
33. Nx64K Service Arrow Keys. Move Cursor
G.704 Framing = Unframed