ADTRAN Express 4110, User Manual

Page: 182 / 205

Appendix E. Terminal Mode Commands
E-4 Express 4110/4120 User Manual 61200176L3-1
Additional Commands
Other commands available from the terminal mode are given below:
Download/Uploading Configuration
The Express 4110/4120’s configuration can be captured to a text file using
the download command. The text file can be edited if required. Upload
of the configuration can be accomplished by sending the text file to the
Express 4110/4120 in terminal mode. A baud rate of 9600 is strongly rec-
ommended when uploading. As soon as the upload has been completed,
type “save” to save the new configuration to flash. A “reset” command or
power cycle 10 seconds after the save command is recommended to
ensure that the new configuration is complete.
save Saves the configuration to non-volatile RAM (flash).
mac Returns the MAC address for the Express 4110/4120.
version Returns the firmware version and routing stack version.
reset Resets the unit.
exit Leaves terminal mode and returns to menus.
download Downloads complete configuration to the terminal screen for
capture.