ADTRAN Express 3100, User Manual

Page: 61 / 128

Chapter 3. Using the Express Configuration Program
61200240L2-20 Express 3100 User Manual 3-25
erences ) to instruct the program to detect the connection without
your assistance.
Automatically Detecting the Unit on Startup
To instruct the ADTRAN Express Configuration program to automat-
ically detect on startup an Express 3100 unit on COM ports 1 through
4, check the
Auto-Detect Express 3100 checkbox (under preferences ).
This feature defaults to the auto-detect state. Uncheck the box to dis-
able auto-detection.
ADTRAN recommends that you use this feature to automatically de-
tect SPIDs and Switch Types, thus greatly reducing the occurrence of
time-consuming problems.
Using Caller ID
Caller ID allows you to view the number of an incoming Voice or Au-
dio call via a pop-up menu on your computer screen. To enable Caller
ID, check the
Caller ID and capture COM port checkbox (under prefer-
ences ).
If you want Caller ID information to display on the screen when you
are not using a terminal application or dial-up networking, check
Cap-
ture COM Port on the Tray Tool menu (see also Capture COM Port on
page 3-4).
You can also view information in the Caller ID log buffer (see Display-
ing the Express 3100’s Caller ID Log Buffer on page 3-22).
Using Terminal Software for Diagnostics
You can specify a software program to use for diagnostic test purpos-
es. Under
preferences > Terminal Software , enter the Program Name
and Program Parameters . With this information entered, when you
click Terminal (under diagnostics ), the program designated in these
fields launches.