ADTRAN Express 3010, Manual

Page: 37 / 116

61200239L1-20 Express 3010/3110 User Manual 3-1
Chapter 3
Application Configuration
There are two methods for configuring the Express 3100: (1) by VT 100
terminal or (2) by AT commands. Before configuring the Express for
any application, the Express should be properly connected as de-
scribed in the Chapter 2.
Technical notes, documents, and scripts can be found on the
ADTRAN web home page at http://www.adtran.com. This documen-
tation explains how to use ADTRAN products in specific applications
on PC and Macintosh platforms.
CONFIGURING THE EXPRESS
It is important to note that some features in the Express do not
immediately take effect upon selection. This prevents unintentional
reconfiguration of the Express during an active call. Items such as
Protocol
and Call Type take effect only at the beginning of a new
call.
Network Options
To place ISDN modem calls, the unit must be configured for Dial Line. Per-
form the following steps to configure for Dial Line operation:
1. Go to the Configuration screen.
2.
Press the number corresponding to Network Options and press
Enter
to view the Network Options choices: Dial Line and
Leased Line .
3. Press the number corresponding to Dial Line and press
Enter
to
select Dial Line.
Area Code (Express 3010 only)
Enter the area code when using the AutoSPID/switch option.