ADTRAN DSU IV ESP, User Manual

Page: 90 / 194

Chapter 9. Configuring Dial Options
9-10 DSU IV ESP User Manual 61204011L1-1
Error Control
This option determines the type of error control to be negotiated at
the start of a V.34 modem connection. The factory default setting is
AUTO V.42/MNP .
Flow Control
This option is used to select the type of flow control used by the
V.34 modem. The factory default setting is
CTS O
NLY
.
Compression
This option is used to select V.42 bis data compression for V.32 bis
or V.34 operation when running asynchronously. When enabled,
data throughput speeds as high as 57.6 kbps may be achieved. For
synchronous applications, the speed is limited to a maximum of
33.6 kbps for the V.34. The factory default setting is
E
NABLED
.
Compression
1= Disabled %C0 Compression disabled
2= Enabled %C1 Compression enabled
Table 9-3. DBU Options AT Commands for V.34 Card (Continued)
Front Panel AT Command Description