background image

C A U T I O N !

SUBJECT TO ELECTROSTATIC DAMAGE

OR DECREASE IN RELIABILITY

HANDLING PRECAUTIONS REQUIRED

Warranty:

ADTRAN will replace or repair this product within the warranty period if it does not 

meet its published specifications or fails while in service. Warranty information can be 

found online at 

www.adtran.com/warranty

.

Trademarks:

 Brand names and product names included in this document are trademarks, 

registered trademarks, or trade names of their respective holders.

Copyright © 2020 ADTRAN, Inc. All Rights Reserved.

ADTRAN CUSTOMER CARE:

From within the U.S.     1.888.423.8726

From outside the U.S. +1 256.963.8716

PRICING AND AVAILABILITY  1.800.827.0807

*61287843F1-13B*

S

PECIFICATIONS

Specifications for the 622v ONT are as follows:

Electrical

Input: 12 V DC, 1.5 A

Maximum Power Consumption: 18 W

Power Supply Adapter: 12 V DC Power Adapter (LPS)

Input Voltage Rating: 100 - 240 V AC

Output Voltage Rating: 12 V DC

Output Current Rating: 1.5 A (minimum)

LAN 1GE
and 10GE





2

Off
Green

Green Flashing

No Ethernet connectivity
Ethernet connectivity present,
no activity
Ethernet connectivity present, 
activity detected. Interface 
operation state is up and 
packets Tx/Rx detected on the 
interface

POTS
1 and 2

2

Off
Green
Green Flashing

On-hook and not ringing
Line is off-hook
Line is ringing

Alarm/ 
Update

2

Off
Green

Green Flashing

Red

No alarm detected
ONU software download 
complete and software upgrade 
in progress. ONU LED will turn 
off once upgrade is successful
ONU software download in 
progress
ONU is powered up and PON 
operational state is up and 
ONU software upgrade failed
New ONU software not 
operational due to any of the 
following reasons:

Software image 
download failed

Software image flash 
write failed

Software image activation 
failed

Software image commit 
failed

LED 

Status

Indication

Optical

TX Power: +4.0 dBm to +9.0 dBm

RSSI max sensitivity: –28.0 dBm

RX overload: –9.0 dBm

TX wavelength: 1270 nm typical

RX wavelength: 1577 nm typical

Physical

Height: 1.7 in (4.3 cm)

Width: 6.1 in (15.5 cm)

Depth: 5.3 in (13.4 cm)

Weight: 0.75 lbs (0.3 kg

Environmental

Operational Temperature Range:

 

0°C to +40°C

Storage Temperature Range: –40°C to +70°C

Relative Humidity: up to 95%, noncondensing)

M

AINTENANCE

The 622v ONT does not require routine hardware maintenance 
for normal operation. ADTRAN does not recommend that repairs 
be attempted in the field. Repair services may be obtained by 
returning the defective unit to ADTRAN. Refer to the warranty for 
further information. Field support for software is provided through 
upgrade facilities.

S

AFETY

 

AND

 R

EGULATORY

Refer to the

 

Safety and Regulatory Notice for this product 

(P/N: 61287843F1-17) for detailed safety and regulatory 
information.
Consultez l'avis sur la sécurité et la conformité à la réglementation 
pour ce produit (61287843F1-17) pour obtenir des 
renseignements détaillés sur la sécurité et la réglementation.
Ausführliche Sicherheits- und regulatorische Informationen sind in 
der Konformitätserklärung zur Sicherheit und Einhaltung von 
Normen zu diesem Produkt (61287843F1-17) aufgeführt.

Documentation for ADTRAN Network Solutions products is available for 

viewing and download directly from the ADTRAN Support Community 

website. 
Go to: 

https://supportforums.adtran.com/welcome

Registration is required.
ADTRAN offers training courses on our products, including customized 

training and courses taught at our facilities or at customer sites.
For inquiries, go to:

 https://www.adtran.com/index.php/training

The following online documents and resources provide additional information for this product:

Summary of Contents for 622v XGS-PON ONT

Page 1: ...1287843F2 622v XGS PON ONT with EU power adapter included 1287843F3 622v XGS PON ONT with AUS NZ power adapter included 1287843F4 Two POTS RJ 11 Interfaces Remote activation and deactivation Remote firmware upgrades and downgrades Remote OMCI management as per ITU T G 988 Refer to the following table for a description of each feature in Figure 2 Figure 2 ONT Interfaces POWER Power is provided by a...

Page 2: ...ations an NRTL Listed Limited Power Source LPS is needed For deployment in international applications an LPS specifically approved for that country such as a CE Mark is needed Resetting the ONT A reset button is available if the 622v ONT needs to be rebooted To reset the 622v ONT press the RESET button for 5 seconds or longer INSTALLATION After unpacking the unit inspect it for damage If damage is...

Page 3: ...ightning or other electrical events and voids the warranty There are four customer connections on the rear of the 622v ONT 10 Gbps Ethernet RJ 45 Connector 10GE Port 1 Gbps Ethernet RJ 45 Connector GE Port Two voice RJ 11 Connectors POTS 1 and POTS 2 ports To connect the customer interface complete the following For 1 or 10 Gbps Ethernet Connection Refer to Figure 2 and insert a Category 5e or bet...

Page 4: ...load failed Software image flash write failed Software image activation failed Software image commit failed LED Status Indication Optical TX Power 4 0 dBm to 9 0 dBm RSSI max sensitivity 28 0 dBm RX overload 9 0 dBm TX wavelength 1270 nm typical RX wavelength 1577 nm typical Physical Height 1 7 in 4 3 cm Width 6 1 in 15 5 cm Depth 5 3 in 13 4 cm Weight 0 75 lbs 0 3 kg Environmental Operational Tem...

Reviews: