ADTRAN 200410L1, User Manual

Page: 37 / 92

Chapter 3. Operation
61200410L1-1 ESU LT User Manual 3-7
To Set the Data Field
Data fields that are available for editing are preceded by a
colon
(:)
.
To View Display-Only Data Fields
An example of a D
ISPLAY
O
NLY
data field is found by
selecting the following menu choices:
To Exit Any Menu Field Operation or Display
Press
Cancel
as many times as required to return to the
desired menu level.
Step Action
1 Press
Enter
while the cursor is located on the submenu
item number. The cursor moves to the data field, to the
right of the submenu item name.
You can use the
Up
and
Down Arrows
to scan the available
value settings which display in the data field position, one
at a time.
2 When the desired value is in the data field position,
press
Enter
to set the value.
The unit is set for the value shown in the data field and the
cursor moves back to the submenu item position indicating
the operation is complete. You can select another submenu
field or press
Cancel
to return to the submenu.
Cancel is available any time during the operation. If used pri-
or to pressing
Enter
after making a data change, the original
data value is restored and the cursor returns to the submenu
field.
Step Action
1 Select
STATUS
from the
MAIN MENU
.
2 Select submenu CURR ERR/ALM .
LOSS OF SIGNAL INACTIVE/ACTIVE
is displayed, giv-
ing the current state of the alarm.