NetVanta 100 Series Hardware Installation Guide
Physical Description
61700412E1-34C
Copyright © 2010 ADTRAN, Inc.
19
2.
PHYSICAL DESCRIPTION
Reviewing the Front Panel Design
shows the NetVanta 150 front panel.
Figure 1. NetVanta 150 Front Panel Layout
Front Panel LEDs
The NetVanta 150 WAP has four LED indicators on the front panel: a single bi-color LED for the
STAT
condition and three single color LEDs for the
ETH
,
5 GHz/802.11a
, and
2.4 GHz/802.11bg
conditions.
describes these LEDs.
Table 1. NetVanta 150 WAP LEDs
LED
Activity
Indication
STAT
Green (flashing)
Unit is powering up. On power up, the
STAT
LED flashes until
the unit is ready for service. The
STAT
LED also flashes during
firmware upgrade.
Green (solid)
Power is on.
Red (solid)
An error condition is present on the unit.
ETH
Off
There is no local area network (LAN) activity on the Ethernet
port (or unit is powered off).
Green (flashing)
LAN activity is present (traffic in either direction).
Green (solid)
Powered device is connected to the Ethernet port (i.e., link
integrity).
5 GHz/802.11a
Off
There is no 802.11a wireless activity detected or the radio is
disabled.
Green (flashing)
Data is being transmitted or received via the 802.11a wireless
band. Data includes network traffic, as well as user data.
2.4 GHz/802.11b/g
Off
There is no 802.11g or 802.11b wireless activity detected or the
radio is disabled.
Green (flashing)
Data is being transmitted or received via the 802.11bg wireless
band. Data includes network traffic, as well as user data.
