Total Access 372 Small Business Unit ONT Installation and Maintenance Guide
26
61287722G1-5B
Subscriber Connections
Refer
to
and
to
install
subscriber
POTS,
Ethernet
and
DS1
services.
POTS Connections
To
connect
POTS,
refer
to
to
complete
the
following
steps:
1. Trim
each
wire
to
length.
Identify
each
pair
in
the
service
cable.
2. Remove
the
rubber
grommet
from
the
housing
and
insert
the
POTS
cables
through
the
grommet.
3. Flip
the
pivot
connector
to
the
“up”
position.
4. Insert
the
appropriate
wires
TIP
(green)
and
RING
(red).
5. Flip
the
pivot
connectors
to
the
“down”
position.
6. Replace
the
rubber
grommet
in
the
housing.
Figure 13. POTS Connections
NOTE
The
RJ
‐
11
POTS
ports
are
used
for
testing
only.
Pots
Connection
TELEPHONE TROUBLESHOOTING:
1. Identify the bad line (POTS 1-8).
2. Plug any working phone into
the appropriate jack.
If the telephone works, the unit
is functioning normally.
If the telephone does not work,
contact your service provider.
3. Remove the telephone from the
POTS jack.
TOTAL ACCESS 372
1287722G1
Summary of Contents for 1287722G1
Page 6: ...Total Access 372 Small Business Unit ONT Installation and Maintenance Guide vi 61287722G1 5B ...
Page 10: ...Total Access 372 Small Business Unit ONT Installation and Maintenance Guide x 61287722G1 5B ...
Page 12: ...Total Access 372 Small Business Unit ONT Installation and Maintenance Guide xi 61287722G1 5B ...
