Unit Installation
NetVanta 1531/1534/1544 Series
30
Copyright © 2019 ADTRAN, Inc.
61702590G1-34H
Tools Required
The customer-provided tools required for the hardware installation of the NetVanta are:
To access the CLI of the NetVanta, you will also need a PC with VT-100 terminal emulation
software and a console port cable. Instructions on how to access the CLI are available in
the quick start guide shipped with your unit or online on the
•
Ethernet cables
•
Phillips-head screwdriver
Mounting Options
The NetVanta 1531/1534/1544 Series units can be installed in rackmount, wallmount, or tabletop
configurations. The following sections provide step-by-step instructions for rack mounting and wall mounting.
Rack Mounting the NetVanta 1531/1534/1544 Series
The NetVanta 1531/1534/1544 Series are 1U-high, rack-mountable units that can be installed into a 19-inch
equipment rack. NetVanta 1531 mounting brackets (P/N 1700511F1) must be purchased separately.
NetVanta 1534 and NetVanta 1544 mounting brackets are shipped with the units. The NetVanta 1531 Series,
NetVanta 1534, and NetVanta 1544 can be rack mounted with two units side by side using the optional dual
mounting tray (P/N 1700508F1).
The following steps guide you in mounting the NetVanta into a rack.
•
If installed in a closed or multi-unit rack assembly, the operating ambient temperature
of the rack environment may be greater than room ambient temperature. Therefore,
consideration should be given to installing the equipment in an environment compatible
with the maximum ambient temperature specified by the manufacturer.
•
Installation of the equipment in a rack should be such that the amount of air flow
required for safe operation of the equipment is not compromised.
•
Be careful not to compromise the stability of the equipment mounting rack when
installing this product.
•
Consideration should be given to the connection of the equipment to the supply circuit
and the effect that overloading the circuit might have on overcurrent protection and
supply wiring. Appropriate consideration of equipment nameplate ratings should be
used when addressing this concern.
•
Reliable grounding of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to the
branch circuit (e.g., use of power strips).
