Total Access 238 Command Line Interface Guide
4
61200630L1-35C
Performing Common CLI Functions
describes the common CLI commands.
Understanding CLI Error Messages
lists and defines some of the more common error messages given in the CLI
.
Table 3. Common Functions
Command
Description
do
The do command provides a way to execute commands in other command sets
without taking the time to exit the current command set and enter the desired
one.
no
To undo an issued command or to disable a feature, enter no before the
command.
Table 4. Error Messages
Message
Helpful Hints
%Ambiguous
command
This message occurs when multiple commands can be derived from the input.
Try using the “?” command to determine the error. Refer to
on page 3 for more information.
%Unrecognized
Command
This message occurs when a single command is entered that fails to match any
supported commands. Try using the “?” command to determine the error. Refer
to
on page 3 for more information.
%Invalid or
incomplete
command
This message occurs when the command is not properly finished. Try using the
“?” command to determine the error. See
on page 3 for
more information.
%Invalid input
detected at “^"
marker
The error in command entry is located where the caret (^) mark appears. Enter a
question mark at the prompt. The system will display a list of applicable
commands or will give syntax information for the entry.
