ADTRAN 1200315L1, User Manual

Page: 5 / 38

v
FCC regulations require that the following information be provided
in this manual to the customer:
1. This equipment complies with Part 68 of the FCC rules. The required label is affixed to the bottom
of the chassis.
2. An FCC-compliant telephone cord and modular plug is provided with this equipment. This equip-
ment is designed to be connected to the telephone network or premises wiring using a compatible
modular jack which is Part 68-compliant. See Chapter 2, Installation, for details.
3. If your telephone equipment (Octal BRI/U Module) causes harm to the telephone network, the tele-
phone company may discontinue your service temporarily. If possible, they will notify you in ad-
vance. But if advance notice isn’t practical, you will be notified as soon as possible. You will be
advised of your right to file a complaint with the FCC.
4. Your telephone company may make changes in its facilities, equipment, operations, or procedures
that could affect the proper operation of your equipment. If they do, you will be given advance
notice to give you an opportunity to maintain uninterrupted service.
5. If you experience trouble with this equipment (Octal BRI/U Module), please contact ADTRAN at
(256) 963-8000 for repair/warranty information. The telephone company may ask you to discon-
nect this equipment from the network until the problem has been corrected or until you are sure
the equipment is not malfunctioning.
6. This unit contains no user-serviceable parts.
7. The following information may be required when applying to your local telephone company for
leased line facilities.
Federal Communications Commission (FCC) Radio Frequency
Interference Statement
This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instruction manual, may cause harmful interference to radio frequencies. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
Shielded cables must be used with this unit to ensure compliance with Class A FCC limits.
Service Type REN/SOC FIC USOC
Basic Rate ISDN 6.0N 02IS5 RJ-48C
Change or modifications to this unit not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.