ADTRAN 1200315L1, User Manual

Page: 30 / 38

Appendix A. Dial Plan Configuration
A-2 Quad BRI/U Module User Manual 61200315L1-1
Quad BRI/U Module: Network Termination
The Quad BRI/U Module can interface directly with the network (PSTN)
and should be configured in the
N
ETWORK
T
ERM
section of the D
IAL
P
LAN
ac-
cordingly. When you are working in the N
ETWORK
T
ERM
section of the D
IAL
P
LAN
menu, and S
LT
is defined as U-BRI-4 , the following interface configu-
ration options are available:
S
WITCH
T
YPE
Write security: 3; Read security: 5
Defines the ISDN switch protocol, provided by the PSTN on the connected
port.
SPID L
IST
Write security: 3; Read security: 5
To properly operate with a network (PSTN) ISDN switch, the BRI interface
must have Service Profile Identifiers (SPIDs) and phone number(s) that
match the SPID(s) and phone number(s) programmed into the ISDN switch
for this line. Each BRI may have one or more phone numbers and SPIDs.
The
SPID L
IST
submenu defines these parameters to ATLAS.
P
HONE
N
UMBER
The phone number(s) assigned to this BRI phone line.
SPID N
UMBER
This entry must match the SPID number(s) which have been set in the net-
work’s ISDN switch (or in the PBX) for this BRI line. A SPID must be entered
for each phone number.
C
ALLS
The number of calls (1 or 2) which can be received or sent on this number/
SPID.
D64, D56, A
UDIO
,
S
PEECH
These options reflect the network provisions for this SPID. If the BRI was
purchased with different services provisioned for the SPIDs, then the call
must match the services supported.