ADTRAN 1200221L1, User Manual

Page: 13 / 34

61200221L1-1 VCOM Module User Manual 2-1
Chapter 2
Installation
UNPACK AND INSPECT
Carefully inspect the VCOM Module for shipping damages. If you suspect
damage, file a claim immediately with the carrier and then contact
ADTRAN Technical Support. If possible, keep the original shipping
container for returning the VCOM Module for repair or for verification of
shipping damage.
CONTENTS OF ADTRAN SHIPMENT
The ADTRAN shipment includes the following items:
• VCOM Module
• VCOM Module User Manual
(insert into main ATLAS 800
PLUS
User Manual)
INSTALLING THE VCOM MODULE
To install the module, follow the procedure described below. Figure 2-1
shows the proper placement of the VCOM Module in the ATLAS chassis.
Instructions for Installing the VCOM Module
Step Action
1 On the rear of the ATLAS chassis, remove the cover plate from the slot
into which you want to install the VCOM Module.
2
Slide the VCOM Module into the ATLAS chassis until the module is
positioned firmly against the front of the ATLAS unit.
3 Fasten the thumbscrews at both edges of the option module faceplate.
4
Install any additional modules into the Base Unit, as specified in the
Installation chapter of the
ATLAS User Manual.