background image

61200221L1-1

VCOM Module User Manual

1-1

Chapter 1

Introduction

VOICE COMPRESSION MODULE OVERVIEW

The Voice Compression Module (VCOM Module) combines with other 
ATLAS components to implement a voice over frame relay (VoFR) capabil-
ity in the ATLAS 800

PLUS

 series of Integrated Access Systems. The 

VCOM Module occupies a single slot in the ATLAS chassis. You can order 
the VCOM Module with support for 8, 16, 24, or 32 simultaneously com-
pressed calls.

FUNCTIONAL DESCRIPTION

The VCOM Module installs into any available slot in the ATLAS 800

PLUS

 

chassis. You can view the module status from the ATLAS front panel (see 
Chapter 4 of the ATLAS 800

PLUS

 User Manual). You can also use the terminal 

menu to provide additional status information, configure the module, and 
download application software. Access the terminal menu either via a 
VT-100 terminal connected to the ATLAS Base Unit's control port or via a 
Telnet session established through the Base Unit's Ethernet port. 

VOICE COMPRESSION RESOURCES

The VCOM Module ordering options provide 8, 16, 24, or 32 voice com-
pression resources.

The VCOM Module provides automatic selection of CCITT Standard or 
ADTRAN-proprietary voice compression algorithms based on endpoint 
configuration.

The VCOM Module supports FAX at 14400 bps.

The VCOM Module includes dual-tone, multi-frequency (DTMF) gener-
ation and detection.

The VCOM Module enables and disables individual voice compression 
resources.

Summary of Contents for 1200221L1



































Reviews: