ADTRAN 1200212L1, User Manual

Page: 101 / 172

Chapter 9. System Configuration
61200212L1-1 DSU IQ User Manual 9-3
Write Community Name (WR COM NAME)
Enter the authentication strings used for SNMP management.
Match the DSU IQ to the SNMP manager for write privileges. If
using front panel entry, see Using the Front Panel on page 9-6 for
more information.
Trap Mgr Options
The T
RAP
M
ANAGER
O
PTIONS
table defines routes for up to five
SNMP managers.
Trap Manager DLCI (TRAP DLCI)
If the trap manager port is set for N
ETWORK
or DTE , this parameter
identifies the virtual circuit used for all traps generated by the DSU
IQ.
Trap Manager IP Address (TRAP IP)
Enter the IP address of the SNMP manager to which the DSU IQ
sends traps.
Trap Manager Port (TRAP PORT)
Enter the DSU IQ port used to transmit traps to the SNMP
manager. Choices are
N
ONE
, DTE P
ORT
, N
ETWORK
P
ORT
, C
ONTROL
P
ORT
, and E
THERNET
P
ORT
. E
THERNET
P
ORT
is available only if the
ethernet card is installed.
Next (NEXT key on front panel)
Edit the next entry in the Trap Manager Options table.
Previous (PREV key on front panel)
Edit the previous entry in the Trap Manager Options table.
Add (ADD key on front panel)
Add a new entry to the Trap Manager Options table.