ADTEL
®
DigADTEL
®
IP
Installation Instructions
For Technical Assistance Please Call 1-800-661-9999
3.0 Hookup
Complete
At this stage, the unit should be properly hooked up to the following components:
•
Ethernet network switch or patch panel
•
Power
•
Audio
Once the unit is properly attached to an Ethernet network and power is applied, it will automatically attempt to
download an audio production from the
ADTEL
®
servers. To do this, your network must supply the following
services:
•
DHCP (Dynamic Host Control Protocol)
. The
DigADTEL
®
IP
unit requires a DHCP server to obtain an
IP address. There is no way to manually assign an IP address directly to the unit. If your network does not
have DHCP support, you cannot use the
DigADTEL
®
IP
.
•
Access to
http://dl.adtel.com
. The
DigADTEL
®
IP
unit downloads its productions from a web server
called
dl.adtel.com
. You must make sure that the unit can access this website. Please check your
firewalls, proxy servers and web traffic control services to ensure that this website is accessible.
If the unit is able to properly access the
ADTEL
®
servers, it will begin to download its latest audio production.
This process usually takes approximately 5 or 6 minutes. Please wait at least this long before trying to diagnose any
problems.
After the unit has finished downloading it will begin to play the audio out of the 8
Ω
and 600
Ω
audio ports. If you
have properly attached your telephone system’s Music On Hold audio cable, people will hear the music and
messages when they are placed on hold.
