ADTEL
®
DigADTEL
®
IP
Installation Instructions
For Technical Assistance Please Call 1-800-661-9999
DigADTEL
®
IP
ON HOLD ANNOUNCER
The
DigADTEL
®
IP
is a high quality digital on-hold announcer. It is designed to be attached to a 10BASE-T Ethernet
network to receive audio production updates via the Internet. These instructions will provide a detailed, illustrated guide on
how to properly attach and troubleshoot the
DigADTEL
®
IP
.
These instructions contain the following sections:
1.0
Package Contents
2.0
Hookup Instructions
2.1
Verify Hookup
3.0
Hookup Complete
4.0
Troubleshooting
1.0 Package
Contents
Once you receive your
DigADTEL
®
IP
audio announcer, check the packaging to ensure that all of the following
items are enclosed:
DigADTEL
®
IP
Audio Announcer
•
This is the audio announcer itself.
3.5mm mini-plug to bare wire audio cable
•
This cable is designed for new installations only. One end plugs into one of
the AUDIO OUT ports of the
DigADTEL
®
IP
unit and the other is
punched down to a telephone termination block.
Category-5 patch cable
•
This cable is used to provide a 10BASE-T Ethernet connection between the
DigADTEL
®
IP
unit and a piece of network equipment (i.e. a switch, hub,
router, etc.)
RCA to 3.5mm adaptor
•
This adaptor is to be used in existing installations. It converts an RCA style
connection to a 3.5mm connection. The
DigADTEL
®
IP
unit will only
accept a 3.5mm connection.
Power Adaptor
•
This is the AC adaptor. It converts standard 120VAC current to the 12V that
the
DigADTEL
®
IP
unit requires.
