19
3.11 Meter information and key operation
3.12 Setting display and key operation
To query the meter information only can enter from
the quickly index list.
When you select the information in the quickly index
list, the right side displays the items of the information.
To enter the setting function, must enter a set of
password, the password is correct to enter the settings
page, if the password is wrong, it will stay in the
password input screen. It's to avoid non-managers to
modify the parameters or misuse. To leave the input
screen, press the left button for two seconds.
Password is 4 digits, 0000~9999 integer, the default
is "1000", after entering the setting function, you can
modify this password, and please be sure to keep in
mind the new password.
Each time you enter the setting function must enter
the correct password, when back to the measurement
screen to enter the settings again, you must input the
password again.
The procedure is to press and hold for one
second at the same time, then will appear P.Code input
screen.
: Move the number input position
: Number increase and decrease
: Enter
3.12.2 Parameter setting
3.12.1 Password input
After the password is correct, it will enter the menu
screen of parameter setting.