22
3.
Move the cursor to [Sync Setting] by pressing “▲” and/or “▼”,
and the press “Enter”.
4.
Move the cursor to each setting item by pressing “▲” and/or “▼”,
and change the settings of each item.
NOTE: Ask your system administrator for “Port” number.
5.
Make sure to save the new setting value by pressing “[Save
Settings]”
.
6. AS4L01X will automatically reboot the system.
！
Timing of Sync Signal Output
Master device sends a sync signal to slave devices whenever a new slave device is found in the same subnet. Slave
devices reply the content from the beginning upon receiving the sync signal. This replay phenomenon also happens after
playing all the content stored on SD Card.
