HCB2001 Capacitive Torch Height
www.machine-controller.com
9
Ⅴ
：
Instruction of Operation Panel Function
1
、
The operation panel of HCB2001 as Figure 8 shows:
Power indication:
Auto Button:
Press the AUTO button, the HCB2001 is always on Auto Mode, no matter there
is a auto signal from outside or not. Then the demanded height can be set via
Height button, (keep pressing AUTO during this process). It greatly simplify the
setting of Auto Height Position.
During cutting, THC needs to work on Auto Mode and it should be controlled by
CNC, having nothing to do with this Auto button
Up/Down Button:
It is active on any mode. Priority is always given to Manual mode.
For UP and Down, priority’s given to UP. In case HF gets problem, it’s always
on UP mode, so the Down doesn’t work.
