Edje-2000
Real Time MPEG 2 Streaming Encoder
Version 1.3
Adtec Digital, Inc. USA
Page 8 of 8
Power Concerns
Power Supply
The Edje-2000 ships with a 24-watt external switching power supply and
six (6) foot standard SJT power cord with a three (3) pin US type plug.
Optionally, a European 3 PIN cord with plug is available. The power
supply carries the CE, UL, CSA and TUV safety certifications. Valid AC
input ranges from 70 to 240 volts AC (VAC), 50 Hz or 60 Hz. The plus 12
Volt Direct Current (DC) output voltage is regulated.
Note:
Never connect any DC voltage other than a regulated 12 VDC.
Audio and Video Concerns
Video Connections
The Edje-2000 uses a video industry standard BNC connector for
composite and SDI video. The industry standard four (4)-pin mini din
connector is used for YC video.
Audio Connections
The Edje-2000 audio input(s) uses standard RCA jacks. Providing
unbalanced (Hi impedance -10 dB, 56 K Ohm) stereo audio inputs for left
and right channels.
Communications Concerns
Control Connectors
The Edje-2000 incorporates Parallel, Serial RS232 and Ethernet (Telnet)
control. The Parallel port utilizes a DB9 male connector; the RS232 In
and OUT ports utilize RJ-11 telephone connectors. For specific
information regarding the protocol and pin out, reference the Technical
and API command documents.
RS232 and Ethernet
The Edje-2000 provides RS232 and Ethernet interfaces. A PC 9 Pin
adaptor is provided to connect the Edje-2000 directly to a PC
communications port. Use of the Ethernet port supports connecting
multiple units to a single PC through the use of an Ethernet hub. The
only limit is the number of ports on the hub and available IP addresses
on the network. Point-to-Point Ethernet connection can be achieved with
a cross over cable.
