35
A
DVANCE
S
YSTEM
F
EATURES
OMITTING ZONES TO ALLOW SYSTEM SETTING
The Full Set setting procedure may be prevented by a zone
fault condition (refer to page 9). To Omit the zone fault
carry out the following:
1) Press Omit key and display will change to a request
to enter the x digit master code.
2) Key in the master code and press enter.
3) Carry out the FULL SET procedure. The omitted
zone is reported to the Alarm Receiving Centre.
On entering the premises the keypad display will show:
This display reminds the user that there is an omitted
zone in the system.
Note:
Zones can only be omitted by master code if pre-
arranged authority has been agreed by the Alarm
Company/insurance Company.
