– 22 –
PANIC KEYS
(Continued)
See your installer and note here any functions programmed for your system.
CHECK IF
PANIC
ZONE
ACTIVE
KEY(S)
PLACE A CHECK NEXT TO PROGRAMMED FUNCTION
DISPLAY
[A]
___SILENT,
___AUDIBLE,
___PERSONAL, ___FIRE, ___ARM AWAY
*
9 5 †
[B]
___SILENT,
___AUDIBLE,
___PERSONAL,
___FIRE,
___ARM STAY
*
9 9 †
[C]
___SILENT,
___AUDIBLE,
___PERSONAL
___FIRE.
96
NOTE: KEY [D] DOES NOT PROVIDE A PANIC FUNCTION (SEE “SINGLE-BUTTON PAGING FEATURE” SECTION BELOW).
*
KEYS [A] AND [B] MAY HAVE BEEN PROGRAMMED FOR SINGLE-BUTTON ARMING INSTEAD OF AN EMERGENCY
FUNCTION, AS SHOWN.
†
THIS ZONE NUMBER NOT DISPLAYED IF KEY HAS BEEN PROGRAMMED FOR SINGLE BUTTON ARMING (ARM-AWAY or
ARM-STAY)
SINGLE-BUTTON PAGING FEATURE
The “D” key on the touchpads can be used to send a signal to a Pager (check if this feature has
been programmed in your system). The message displayed on the Pager when the “D” key is
pressed is
999–9999
. This code could mean “call home”, “call your office”, or other message. A
prearranged meaning for this signal should be agreed upon. See the illustration on page 12 for the
location of the “D” key.
To send a signal to the Pager, simply press the “D” key for at least 2 seconds. The recipient, on
seeing the
999–9999
display, will understand the pre-arranged meaning of this signal.
