ADT Safewatch Pro 2000 User Manual Download Page 11

– 11 –

FUNCTIONS OF THE TOUCHPADS

1. DISPLAY WINDOW.

Custom English Display Touchpads: These 2-line, 32-
character Liquid Crystal Display (LCD) touchpads display
protection point identification, system status, and messages.
English Display Touchpads:  Display protection zone
ID and system status messages using pre-designated words.

2.

   1    

  OFF KEY: Disarms burglary portion of the system,

 

 

silences alarms and audible trouble indicators, and

 

 

clears visual display after problem's correction.

3.

    2       

AWAY KEY: Arms the entire burglary system,

  

perimeter and interior.

4.

   3    

     

STAY KEY: Arms perimeter portion of burglary  

 system only. Interior protection is not armed, allowing  

   

movement within premises without causing alarm.

5.

   4    

     

This is not a Function key. Used only as a numeric 

  

 

   

key.

6.

   5    

  TEST KEY: Tests the system and alarm sounder if

  

 

disarmed. Refer to 

TESTING THE SYSTEM section for

 

 

 

test procedures.

7.

   6    

  

 BYPASS KEY: Removes individual protection 

  zones 

 

from being monitored by the system.

8.

   7    

   

INSTANT KEY: Arms in manner similar to STAY

 

 mode, but without the entry delay feature. Entering via

 

 

the entry/exit door will cause an instant alarm.

9.

   8       

CODE KEY: Used to assign additional user codes

 

  

for other users of the system.

  1 0 .

      

 

 

CHIME KEY: Turns CHIME mode on and off. When

  

on, the opening of windows or doors while the system

  

is disarmed will sound 3 beeps at the touchpad(s).

  1 1 .

  

  

 

  

 

 

READY KEY: Used to display all open protection zones.

  1 2 .

      

  KEY: This key can be used for "Quick Arming" of the

system without use of a security code (if programmed).

13. KEYS 0–9:  Used to enter your security code(s).

14. READY INDICATOR: (GREEN) Lit when the system is

ready to be armed (no faults present). While the system is
disarmed, this indicator will go on and off as protection zones
are closed and opened.

15. ARMED INDICATOR: (RED) Lit when the system has been

armed.

16. INTERNAL SOUNDER: The built-in sounder mimics the

alarm sounder during alarms, and will also "beep" during
certain system functions.

17. EMERGENCY (PANIC) KEYS: Keys A, B, and C may all

have been programmed for emergency functions; however,
keys A and B may have been programmed for single button
arming instead.  For details, see 

PANIC KEYS  

section.

18. KEY D: This key may have been programmed for single-

button paging (for details, see the 

SINGLE-BUTTON PAGING

FEATURE 

section).

† Note:  Keys 

  1   

 

t

hrough

    3     

and 

       t

hrough

    9     

each

  

perform their associated companion system functions (

OFF,

  AWAY, STAY

, etc.) when preceded by an entry of the security

  

code (as described later).

Summary of Contents for Safewatch Pro 2000

















































Reviews: