ADT Video Doorbell
Quick Installation Guide
INTRODUCTION
5
DBC835 Wireless Doorbell Camera Installation
Overview
Doorbell/WPS Button has two functions:
WPS Pin Code Mode: When pressed and held 5 seconds, the doorbell camera will be
in WPS Pin Code Mode.
Note:
When Wi-Fi connection is established, the WPS function is disabled.
Doorbell Mode: Press the button to ring the door chime.
LED Activity & Behavior
:
Doorbell
Activity
LED
Color
LED
Intensity
LED
Behavior
Description
Power Up
Blue
Medium
Solid
When boot-up sequence starts, the LED will
be solid Blue.
WPS PIN
Mode
Green
Medium
Blinking
When doorbell button is held down 5
seconds, the LED will start flashing green
indicating doorbell camera is in WPS Pin
mode.
WPS Failure
Red
Medium
Triple Blink
If doorbell camera falls during WPS
enrollment, the LED will flash RED three
times.
Network
Connected
Blue
Medium
Solid
After connected to network, LED color will
change to Blue solid.
Network
Disconnected
Red
Medium
Blinking
When power-up sequence is completed, the
LED will flash RED until connected to
network.
FW Download
In-progress
Green
Medium
Spinning
LED spinning green indicates FW is being
downloaded. Once complete, update takes
place and doorbell reboots. LED then goes
into power-up mode.
A/C
Disconnected
Red
Dim/
Medium
Intermittent
Blinking
LED will blink in 5 second intervals when
A/C is not detected.
Standby
Blue
Dim
Solid
After power-up and connected to network.
Motion
Triggered
Blue
Dim
Solid
When PIR detects motion the LED will turn
dim blue.
Doorbell
Button Press
Blue
Dim-
Medium
Pulsating
Blue LED will pulse between dim and
medium intensity while the waiting for
interactive session.
Factory Reset
Red
Medium
Double
Blink
When the reset button is held down for 15
seconds and released, LED will blink red
twice indicating the start of reboot/factory
reset.
Bracket
Connected
Blue
Dim
Solid
After connected to the doorbell, LED color
will turn to dim blue.