ADT NVR4200 Series User Manual Download Page 185

Page: 185 / 259

Hybrid Standalone NVR User Guide

Snapshot

When an alarm occurs, this feature takes a still image of the channel(s) you set to record.

Check the box to enable, and the click the buttons for the channels that you want included in the
snapshot. The selected channels are highlighted.

Figure 4-46

Checkboxes

Show Message.

If enabled, a pop up alarm message appears in the local host screen.

Send Email.

If enabled, an email alert is sent to you when an alarm occurs.

Alarm Upload.

If enabled, the alarm signal is uploaded to the network.

Buzzer.

If enabled, a buzzer sounds when an alarm occurs.

Message.

If a 3G network is connected, a message is sent when a motion detection event

occurs.

Note: This feature is not supported by ADT at this time.

NVR4200 Series User Guide

165

Summary of Contents for NVR4200 Series




































































































































































































































































Search results

Summary of Contents for NVR4200 Series

Reviews:

Related manuals for NVR4200 Series

Brands by name

Popular brands

ADT NVR4200 Series, User Manual

Search results

Summary of Contents for NVR4200 Series

Reviews:

Related manuals for NVR4200 Series

Brands by name

Popular brands