Galaxy 8/18/60/500/512
19
User Guide
1=Timer A, 2=Timer B or 3= Timer A+B is entered out with the
assigned times, an Illegal Code event is recorded in the log and any
outputs programmed as Illegal Code are activated.
TEMPORARY CODES (Galaxy 500 & 512)
Temporary Codes allow a PIN to be temporarily allocated to a user.
On selecting this option, enter the number of days (0 – 99) that the
code is to remain active. The default setting of 0 indicates that the
code is permanent. A temporary code expires and is removed from
the codes list at midnight after the assigned number of days. A code
that has been assigned as a Temporary Code is indicated on the user
code display by a ^ between the user number and the user name, e.g.
001^ USER.
The manager code cannot be assigned as a Temporary Code.
PIN CHANGE (Galaxy 500 & 512)
If a user is assigned the PIN Change feature in the Temporary Code
option, the user must assign a new PIN after a predetermined period
of time otherwise the PIN expires and is no longer operational. A
notification (1 – 28 days) that the pin requires to be changed can be
assigned using the PIN Warning option. This prompts the user to
assign a new code whenever the expiring code is entered during the
PIN Warning period (except during system unsetting). The new PIN
must be six digits and must be different from any current PIN. The
new PIN must be re-entered and, if confirmed, the user is returned to
the banner. If the esc key is pressed or the new PIN entered is invalid,
the user may continue to use the panel as normal. The next PIN entry
will prompt the PIN change.
NOTE:
If the user has not entered a new PIN by the end of the
PIN Warning period, then the PIN is erased on the next
unsetting of the system.
To program a user code as a PIN Change code, select the
Temporary Codes option and press the
T
key instead of
NOTE: A number of days for a temporary code; press the
ent key to accept the programming and return to the
previous menu level. A code assigned as a PIN Change
code is indicated on the user code display by a
T
between
the user number and the user name, e.g. 001
T
USER.
0 = OMIT ZONES
[ent] to Select
8
8 = CODES
[ent] to Select
PIN + ent
ent
CODES
1 = User Codes
ent
[ent] to Select
1 = Modify PIN
ent
Temp Code
00 (0-99) days
001 USER
L3
ð
ent
Temp Code
25 (0-99) days
5
[ent] to Select
5 = Temp Code
ent
2+5
Temp Code
(0-99) days
ent
PIN Change Code
Ú
Technical Manuals Online! - http://www.tech-man.com
