Mounting
Use the pre-applied adhesive tape when attaching
both parts of the detector to your door or window.
• Make sure that all surfaces are clean and dry.
• Make sure to place both parts of the detector
correctly as the adhesive tape will be difficult
to remove.
• Place the detector at the top of door or window
frames to avoid accidental damage.
Mounting
2.
Place one part of the detector on your door or
window, and the other part on the frame of the
door or window.
• Make sure that both parts of the detector are less
than 0.5 inches apart when the door or window
is closed. Use optional spacer if required.
• For double doors, attach the smaller part of the
detector to the most-used door and the larger
part to the least-used door.
