1.
Insert spacer pin into magnet base slot.
Mounting
Magnet
Spacer
2.
Slide spacer forward to lock it onto the magnet.
Magnet
Spacer
You can test your ADT Door and Window Detector by
performing a Walk Test on the ADT Security Hub, opening
and closing the door or window where it's been installed,
and then checking its status on the ADT Security Hub
touchscreen. See the ADT Security Hub User Guide for
more details.
D
Note:
If you have an ADT professional monitoring service
activated, additional testing is required whenever you
connect a new device. Follow the on-screen instructions
in the SmartThings app to complete testing.
If it's difficult to align both parts of the detector
properly, you may want to adjust the height of the
magnet by squeezing the tabs on the side or by adding
the supplied spacer:
