,QVWDOOLQJ WKH &KDUJHU
Connecting Batteries to the Charger
6
ADT-CHG-120 Instruction 05/01/98 PN 50938:A
&RQQHFWLQJ%DWWHULHVWRWKH&KDUJHU
2YHUYLHZ you can connect 25 AH –120 AH batteries to the charger. This section provides
illustrations and instructions for connecting two batteries or for connecting four batteries.
&RQQHFWLQJ 7ZR %DWWHULHV Figure 5 shows how to connect two 25 AH batteries to the
charger:
Figure 5 Connecting 25 AH Batteries
Table 3 contains instructions for connecting batteries to the charger:
Warning: Do not
connect the Battery
Interconnect Cable
at this time.
Refer to “Starting the
Charger” on page 16.
036
7%
7%
$'7&+*
Step Action
1
Remove all power sources to the charger.
2
Connect the battery negative cable to the TB2 terminal (on the charger labeled
“Battery –” as shown in Figure 5.
3
Connect the battery positive cable to the TB2 terminal (on the charger)
labeled “B” as shown in Figure 5.
4
Proceed to the section “Connecting the Charger.” Do not connect the Battery
Interconnect Cable at this time—refer to “Starting the Charger” on page 16.
Table 3 Connecting 25 AH Batteries