ADT Pulse MDC835, Installation Manual

Page: 11 / 28

5
Chapter 2
Basic Setup
This Chapter provides details of installing and configuring the IP
Camera
.
Installation
Figure 3: Wired Network Connection
1. Make the Connection
Using a Wired Connection
If you are using a wired connection to the MDC835, connect
a standard Ethernet cable (not included) to the LAN port
of the supplied cable of the camera and the Pulse Gateway
or Total Security (TS) Base panel.
Using a Wireless Connection
The wireless (WPS) connection between the camera and the
Pulse Gateway or Total Security (TS) Base panel is
performed during the Pulse enrollment. See the following
section for more details.
2