adt-audio 5MT Installation Manual Download

Page: 17 / 25

��

2-Track Record 1-4

The 2-track record connectors are directly connected to the corresponding jacks in the patch bay.

All 2 track record jacks are half normalized to a ‚2-track input‘ pair of jacks, which is half normalized

to the stereo master output. See the chapter about the patch bay for details.

The outputs for the 2-track 5 and 10 or available on the ‚2-Track 5 & 10‘ connector.

If there is no patch bay installed, these connectors are not installed.

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

��

��
��

�

��

��

��

��
��
��

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

��

��

��

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

�

��

��

��
��

�

��

��

��

Talkback Extension

In addition to the direct outputs of the PFL mas-

ter and the external output of the talkback sys-

tem, there are the inputs of the listen system

and some control ports. Please note, that with

the master section E2 and S, only the Listen Mic

1 input is active. Listen Mic 2 and External TB

Mic in require an AT master section. However,

these lines are available in the talkback modu-

le and can be used for custom modifications. The

Listen Remote Control Input and the Autocue

Summary of Contents for 5MT


























Search results

Summary of Contents for 5MT

Reviews:

Related manuals for 5MT

Brands by name

Popular brands

adt-audio 5MT, Installation Manual

Search results

Summary of Contents for 5MT

Reviews:

Related manuals for 5MT

Brands by name

Popular brands