43
BitTorrent Configuration
The configuration of BitTorrent can be setup here, fill in the settings in each blank then press
apply to activate. Please refer to the following instructions to configure:
1.
Enable BitTorrent:
Choose Yes to enable the BitTorrent download or choose No to
disable.
2.
Download Folder:
Choose the folder that contains the folder where you place the Torrent
files.
Note:
To download successfully, please make sure that the torrent files and the folder for
restoring downloaded data to be in the same folder. (Ex, if you place those Torrent files in
folder “share”, the folder “Multimedia” for placing downloaded data should be also in the
folder “share”.
3.
BitTorrent Configuration File:
You can specify any name for the file. The file is for
recording the download information, which helps to resume interrupted download.
Note: Please don’t delete the file after downloading
4.
Max Active Torrent Number:
To set the numbers of Torrent files to be activated at the
same time. A number within 10 is allowed.
5.
Scheduler:
Chick Yes to enable the scheduler. The scheduler is provided for users to set
up the start/end time of BitTorrent functionality.
6.
Start:
Set the time to start BitTorrent download/upload.
7.
End:
Set the time to end BitTorrent download/upload.
(Ex you can configure the scheduler to start by “Everyday, Hour: 23, Minute: 0” and end
by “Everyday, Hour: 6, Minute:0” to process BitTorrent download/upload from 11:00PM to
6:00AM)
