14
IDENTIFYING PARTS OF THE DISK ARRAY:
Rear View
1. RS232 Adapter ( Terminal Port )
2. Cooling Fans
3. Power Supply
4. IEEE 1394 Host channel adapter Port
5. Fan Door Screws
6. AC Power Source Input Socket
7. AC Voltage Select Switch ( 115V / 230V )
8. Power Supply Unit Switch ( On / Off )
Figure: Power Source
Chapter 2 Getting Started
POWER SOURCE
Choosing a Working Voltage
The system can run either on AC 115V (+/10%) or AC 230V (+/10%), Slide the AC voltage select
switch on the power supply to the correct position which corresponds with the wall outlet supply
voltage.
Warning !
Wrong AC Voltage input will harm the power supply and cause serious damage to the
Disk Array.
This Disk Array must be grounded!
This Disk Array is supplied with an AC power cord equipped
with a 3-wire grounding type plug. This is a safety feature and it is important to only use a 3-wire
grounded mains power cord.
Host Port
Terminal Port
4
1
3
2
5
6
7
8
Figure: Rear View
Host Port
Terminal Port
