Ads Security FA700KP-ADS, User Manual

Page: 54 / 64

FA700KP-ADS Setup (cont'd)
54
How to Set the Time and Date
You can set the time and date from the Set Time & Date screen.
Pressing the Time and Date bar located at the bottom of each
FA700KP-ADS screen displays
the Set Time & Date screen.
•
When the time is set it will be stored in the FA700KP-ADS only.
The FA700KP-ADS will send the time to the control panel every
hour. This 1-hour timer starts on FA700KP-ADS power-up.
•
If Adjust for DST (Daylight Savings Time) is selected, the
FA700KP-ADS will adjust for Daylight Savings time. When
selected, the next time the 1-hour timer expires, the new value
will be sent to the control panel.
!
IMPORTANT: This means that the FA700KP-ADS setting will override
and overwrite the control panel time setting. That is, if the control panel
is set to DST and adjusts but the FA700KP-ADS is not, upon the 1-hour
timer expiration, the control panel will be updated to the current time
that is not adjusted for DST.
From the Set Time & Date screen, adjust either or both the time
and date by pressing the increase or decrease arrow buttons as
necessary until the proper month, day, year, hour, and minute are
displayed.
CANCEL
BUTTON OK
BUTTON
DECREASE
BUTTON
(TYPICAL)
INCREASE
BUTTON
(TYPICAL)
6270-008-V0
Set Time & Date Screen