Ads Security A180 Series, User Manual

Page: 8 / 13

After sale support for ebay buyer EMAIL: estore3150@gmail.com 7
CODE mode:
Key in password then presses the CODE button. You can code thee wireless accessories
under this CODE mode. Press the CODE button to return. System will return automatically if
there is no operation in 30 seconds during CODE mode condition.
RECODE mode:
Key in password then presses the RECODE button. Press 1 for 10 seconds message record,
press 2 to listen what you have recoded, press the RECODE button to return. System will
return automatically if there is no operation in 30 seconds during RECODE mode condition.
The alarm system doesn’t have inner microphone you will need telephone’s help.
Code/ Register the wireless Accessories:
Has two ways to code the wireless accessories. One way is under CODE mode. Another way
is under SET mode.
1. Under SET mode: key in the command 21 * [ZONE number] # , start to trigger all
wireless accessories to let main panel recognize them. You should hear one beep if
coding successfully. Remember, you can key in command 21 * [ZONE number] # to
change the ZONE number, and code the sensor to different ZONE. Most user use
zone 01 for remote controllers and keypads. Zone number can be any two digital
numbers between 01 and 90.
2. Under CODE mode: key in the zone number , start to trigger wireless accessories to
let main panel recognize them. You should hear one beep if coding successfully.
Remember, you can key in different number to change the ZONE number, and code
the sensor to different ZONE. Most user use zone 01 for remote controllers and
keypads. Zone number can be any two digital numbers between 01 and 90.
Make sure you turn off all sensors before you coding new wireless accessories. The PIR
sensor will keep working 10 seconds after turn off the power.
Record voice message:
Connect the telephone to the main panel. The alarm system doesn’t have inner microphone
you will need telephone’s help. You will hear the voice message first when the alarm system
ring you up.
Has two ways to recode the message. One way is under RECORD mode. Another way is
under SET mode.
1. Under SET mode: key in the command 23 * 1 # for 10 seconds voice message
recording. Key in the command 23 * 2 # for listening what you have recorded.
2. Under CODE mode: key in 1 for 10 seconds voice message recording. Key in 2 for
listening what you have recorded.