ADRF PSR-78-9533-UB, Manual

Page: 35 / 59

Advanced RF Technologies, Inc. 35
7 PSR-78-9533-UB WEB-GUI SETUP
The Web-GUI allows the user to communicate with the repeater either locally or remotely. To connect to the
repeater locally, you will need a laptop with an Ethernet port and an RJ-45 crossover cable. To connect to the
repeater remotely, you will need to have an active internet connection via an external modem or LAN.
7.1 Repeater/PC Connection Using Web-GUI

Verify that your Local Area Network Connection is set to obtain an IP address automatically under the
Internet Protocol (TCP/IP) properties.
- If you are connecting to the unit remotely (use of a modem), then skip the step above.

Connect the RJ-45 crossover cable between the laptop’s Ethernet port and the repeater’s Ethernet port.

Launch either Internet Explorer or Google Chrome.

Type the following IP address into the address bar of the Internet Browser: http://192.168.63.1
- If you are connecting to the unit remotely, then type the IP address of the modem to connect to the unit

The following login screen will appear:

Figure 7-2 Login Page
If you are not the Administrator, please type in your assigned username & password which you should have
received from the Administrator.
The default username and password for the General User is
adrf & adrf , respectively.
The default Administrator login is admin & admin , respectively.