ADRF PSR-78-9533-UA, Manual

Page: 16 / 60

Advanced RF Technologies, Inc. 16
2. INSTALLATION
2.1 Wiring Compartment
The bottom of the PSR-78-9533-UA is a wiring compartment with pre-cut holes. These holes are designed to
be used in conjunction with conduit hubs to prevent water ingress. A total of 6 pre-cut holes are available to use
for the various cables that will be needed for the proper operation of the repeater.
To maintain UL 2524 Listed status, unused ports must be properly weather proofed.
Table 2-1 Pre-cut hole size and labels
Silkscreen Label Location Diameter
AC 100-240V LEFT 22.2mm (7/8”)
ANNUNCIATOR RIGHT 22.2mm (7/8”)
BATTERY ADRF-BBU ONLY NON LPS RIGHT 22.2mm (7/8”)
DONOR BOTTOM 33.0mm (1-3/8”)
Ext. ALARM BOTTOM 33.0mm (1-3/8”)
SERVER BOTTOM 33.0mm (1-3/8”)
Figure 2-1 Wiring Compartment Cutout Holes