Duo-i6525 RF Repeater
User Manual V1.0
-
Alarm: Will display five alarms with three different status conditions (Normal,
Soft Fail or Hard Fail).
-
Message Board: Will show up to recent 20 log messages (Alarms &
Heartbeats).
-
Modem: Will display the status of the mode (e.g. Disabled, Not Connected or
Connected)
-
Installation: Will display repeater’s installation status (Not Installed or
Installed).
-
Repeater Info: Will display repeater’s serial number, modem ESN and MDN.
-
Repeater Location: Will display the address where the repeater is installed
-
Technical Support: Will display ADRF’s Technical Support contact
information.
-
Installer Contact Info: Will display the installer’s name, phone and e-mail
address.
Note: Once successfully logged in, the repeater model name and the site/cascade
ID will be displayed on the top of all the windows (except for the Main Window).
Parameters Range Step
Size
DL/UL
Output Power
-10 ~ 28 dBm
0.1 dB
DL Input Power
5 ~ -95 dBm
0.1 dB
Gain
40 ~ 65 dB
0.5 dB
Table 2 – Default Parameter Ranges
vi) If you click on
Control tab
, the following window will appear:
In this window, the user can adjust the following parameters:
General Setting
- Automatic Gain Control (Default mode is Off)
Advanced RF Technologies, Inc. Proprietary Document
Page 22 of 31
