BO-46-1000 – Blackout Manual – Prize - V1.2
7
Chapter 03 - Unit Installation
Assembling your Blackout Unit
1.
Carefully remove the Cabinet from the shipping container, giving yourself enough space.
2.
Move the cabinet to the desired location.
3.
Lift the top Header to upright position. To do so you will need to press on the spring pins
on each side of the hinge.
4.
Plug in the power cord on the back of the cabinet.
Chapter 04 – Procedure to refill Prizes
* Very important to perform step 6 and 7
1.
Unlock and open front door.
2.
Unscrew the pin in the middle of the prize dispenser.
3.
Install prizes on dispenser.
4.
Re-install the middle pin to secure the prize in the unit
5.
Lock the front door.
6.
Access the operator menu using the Operator Button located inside the coin door.
7.
Enable all dispensers Loaded by pressing the prize dispenser icon (number 1 to 12). The
icon is yellow when enabled and grey when disabled. (see figure 5.1 below).
8.
Only the prize dispenser in yellow will be available to players if they win.
9.
You can test the sensor using rotor #5. (See figure 5.3 below).
10.
Press icon “return to Game” when finished.
