6
III. INITIAL ASSEMBLY
For your convenience of transportation and reduction of possible damage, the batteries and
the seat unit are separately packaged. So you need to assemble them onto the main frame
of your scooter.
OPENING THE PACKING BOX
Open the packaging box of your new scooter, and take off all the protective lining, then take
out the folded scooter from the box.
ADJUSTING ANGLE OF TILLER
Loosen the lock-nut
Lift the tiller up until at a proper angle for
yourself
Tighten the lock-nuts to fix the tiller
ASSEMBLE THE SEAT SUPPORT
Insert the seat support into the seat tube
located on the rare section
Align the bolt hole
Insert the bolt into the hole
ASSEMBLE BATTERY UNIT
Align electrode terminal on battery
ASSEMBLE SEAT UNIT
Put the seat onto the seat support
Pull out the seat lock lever, adjust seat to desired position. The seat will lock
automatically.
Insert left and right armrests into square tubes separately.
Adjust to the desired position and lock the nuts.
ASSEMBLE BASKET
Take off the two screws located on the front of the tiller
Assemble the fixing part of net basket on the front of the tiller
Insert the net basket into
the fixing part
.