Adobe LiveCycle
Manually Configuring JBoss
Installing and Configuring LiveCycle Security Products for JBoss
Configuring JBoss properties 51
3. Open the jboss-service.xml file (
[appserver root]
/server/all/conf ) in a text editor and after the following
text:
<!-- EAR deployer, remove if you are not using Web layers -->
<mbean code="org.jboss.deployment.EARDeployer"
name="jboss.j2ee:service=EARDeployer">
Add the following two lines:
<attribute name=”Isolated”>true</attribute>
<attribute name=”CallByValue”>true</attribute>
Save the file.
4. Open the jboss-service.xml file (
[appserver root]
/server/all/deploy/jbossweb-tomcat55.sar/META-INF)
and change the
UseJBossWebLoader
attribute from true to false:
<attribute name=”UseJBossWebLoader”>false</attribute>
Save the file.
Configuring JBoss properties
This section applies to LiveCycle Reader Extensions and LiveCycle Document Security only.
You must edit the
jacorb.poa.thread_pool_max
property in the jacorb.properties file to ensure that
your Adobe document services run properly on the application server. The jacorb.properties file is located
in the
[appserver root]
/server/all/conf directory.
Before making any changes, ensure that you create a backup copy of the jacorb.properties file.
➤
To edit the jacorb.properties file:
1. Open the jacorb.properties file in a text editor.
2. Locate the
jacorb.poa.thread_pool_max
property and change the property value to 16.
Configuring the transaction time-out property
This section applies to LiveCycle Reader Extensions and LiveCycle Document Security only.
You must modify the transaction time-out value for your JBoss Application Server to prevent transaction
time-out exceptions.
➤
To configure the transaction time-out property:
1. Navigate to the
[appserver root]
/server/all/conf directory and open the jboss-service.xml file in a text
editor.
2. Set the value for
<attribute name="TransactionTimeout"></attribute>
to a higher
number. For example, if the value is 300, set it to 300000 or 3000000. This value is in seconds.
3. Save the file and restart the application server.