OPERATION
ENGINE START-UP & CAUTIONS
Check oil and fuel prior to start-up.
1. Set the gear to neutral and engaged parking brake.
2. Use key to turn “Main Switch” on.
3. Turn the key to start position to crank the starter motor..
CAUTIONS
：
4. In case the engine will not start after the starter running 3 ~ 4 seconds, step on acceleration
pedal slightly, then try again, the engine should start.
5. Use choke function on right side of central floor, if the temperature is low and difficult to start.
Brake pedal must step to the end, otherwise the CDI wouldn’t function.
Release the key immediately after engine start-up.
Did not pressing the button again as engine is running
otherwise engine may be damaged.
Start-up the engine at an open area to avoided emission poisoning.
Choke
Power
Supply
