CM PFS0804 ZZZ-173 MAS-HL REV1.doc
ZZZ-173-MAS-HL
4
INSTRUCTIONS
1. Assemble two corner arches (02-539) to center
arch (02-540) using
1 3/4” bolts (O) and wing
nuts (Q). Repeat with the remaining arch.
2. Connect the two arches with three pipes (06-368).
Ensure the bolts point towards the inside of the
shelter. NOTE: Include three brackets (02-542) in
this step if using them to attach to the wall.
3. Insert the swaged end of each leg (02-534) into the
corner arches (02-539) by lifting one side of the
structure at a time.
4. Attach the two remaining pipes (06-368) between
the legs (02-534), using the holes
3” from the bottom.
Install the diagonals (06-369) at the same time.
5. Connect the pipes (02-536) and (02-537) and attach
to the inside of the frame. Insert the pipes (02-538)
into the bottom of pipes (06-372), then attach
(06-372) to the holes in (02-536) and (02-537).
6. Add the two pipes (02-535) to the bottom. Include
two brackets at the front to secure to the ground.
Ensure all the bolts are tightened.
7. Place the cover over the frame. Attach all the straps
around the pipes, going all the way around the cover.
Install plastic caps on the bottom of legs (02-534).
8. Secure the structure to the ground and the wall using
the appropriate anchors (not included).
INSTALLATION OF THE DOOR
9. Place the shower hooks (M-4) on the pipe above the
door and close the door using
elastics and “S” hooks
(L-
8). Close one end of the “S” hook around each
elastic. NOTE: A 90° cut at the bottom corner of the
roof may be required..
N.B.
It is recommended to fix the shelter to the house and to the ground. Some brackets have been provided for this purpose. We
recommend that you verify with local stores what hardware is best to use according to the building structure and the ground.
L
.
.
.
.
.
.
.
.
M
L
